S SpecsCalc

What PSU Do You Need for the AMD Radeon RX 9060 XT?

· Methodology

Recommended wattage, the realistic minimum, and the connector you need — with a live peak-draw estimate.

Card peak (TBP)

160W

Recommended PSU

550W

Official minimum

450W

🛒 Shop 550W PSUs on Amazon

As an Amazon Associate we may earn from qualifying purchases.

Estimate your full-system peak draw

Quick Summary · TL;DR

AMD rates the Radeon RX 9060 XT at 160W board power (150W on the 8GB model) and lists a 450W minimum PSU. That minimum is real and a good 450W unit will run the card. We suggest 550W 80+ Gold instead, because 450W leaves almost nothing for a 140W-plus CPU and pushes a cheap unit to the top of its load band.

Why 550W and not less?

The AMD Radeon RX 9060 XT has an official board power of 160W on the 16GB model and 150W on the 8GB model. Factory-overclocked add-in-board cards measure closer to 180W, and any of them can spike well above the rated figure for milliseconds at a time. Add a typical gaming CPU and the rest of the system, then keep the supply in its efficient 50-80% load band, and 550W is the comfortable target. The AMD Radeon RX 9060 XT draws power through a 8-pin PCIe connector, so any quality unit with the right PCIe cables works; an ATX 3.x unit is still a nice-to-have for transient headroom.

Want a complete, balanced parts list around this card? See the $1200 Mid-Range build.

Three power supplies that fit the AMD Radeon RX 9060 XT

Load figures assume this card at its 160W peak alongside a Ryzen 5 or Core i5 class CPU and 75W for the rest of the system, so roughly 330W at the wall-facing side of the supply. The card draws through an 8-pin PCIe connector.

Balanced

Corsair CX550 (2023) 550W 80+ Bronze

550W · 80+ Bronze

PCIe 8-pin2
Depth140 mm
Warranty5 yr
Load at peak60%

Non-modular but compact at 140 mm, with one dual 6+2 PCIe cable. The honest floor for a single mid-range card on a tight budget.

Check the CX550 on Amazon

Room to upgrade

Best fit

Corsair CX650 (2023) 650W 80+ Bronze

650W · 80+ Bronze

PCIe 8-pin2
Depth140 mm
Warranty5 yr
Load at peak51%

The small step up from the CX550 for a build that will take a hotter CPU. Same 140 mm body, same non-modular caveat.

Check the CX650 on Amazon

Anything under 60% keeps a hybrid-mode fan off for most of a gaming session, which is why the CX650 is the pick here rather than the cheapest unit that technically fits. Specifications are taken from each manufacturer's product page; confirm the exact revision before ordering, as connector counts change between refreshes of the same model name. As an Amazon Associate, SpecsCalc earns from qualifying purchases.

PCIe power connector types used with AMD Radeon RX 9060 XT
The AMD Radeon RX 9060 XT takes an 8-pin PCIe connector. Use the native cable for that connector; an adapter stack is the most common cause of a melted plug.

Sources & verification

The 450W baseline is the manufacturer-class figure for the AMD Radeon RX 9060 XT; the 550W target adds room for CPU choice and transient load. How both numbers are derived is set out in the methodology.

Frequently asked questions

What power supply do I need for the AMD Radeon RX 9060 XT?

AMD lists 450W as the minimum and that is accurate for a modest build. We suggest a 550W 80+ Gold unit instead: it covers the 160W card, a power-hungry CPU and transient spikes, and keeps the supply in its efficient load band.

Is a 450W PSU enough for the AMD Radeon RX 9060 XT?

Yes — 450W is AMD’s own figure and the card only draws 160W, so a quality 450W unit paired with a mid-range CPU works. It leaves little room for a 140W-plus CPU, extra drives or a future upgrade, which is why 550W is the quieter long-term choice.

Does the AMD Radeon RX 9060 XT need an ATX 3.0 power supply?

No — it uses standard 8-pin PCIe power, so any quality PSU with the correct PCIe cables is fine. An ATX 3.x unit simply adds extra transient headroom.

Different parts? Run the full PSU Wattage Calculator, or browse every GPU’s PSU requirement.