S SpecsCalc

What PSU Do You Need for the AMD Radeon RX 6600?

· Methodology

Recommended wattage, the realistic minimum, and the connector you need — with a live peak-draw estimate.

Card peak (TBP)

132W

Recommended PSU

450W

Practical baseline

400W

🛒 Shop 450W PSUs on Amazon

As an Amazon Associate we may earn from qualifying purchases.

Estimate your full-system peak draw

Quick Summary · TL;DR

For the AMD Radeon RX 6600, get a 450W 80+ Gold power supply (400W minimum). The card peaks near 132W; the rest of the recommendation is headroom for your CPU and the transient spikes modern GPUs produce.

Why 450W and not less?

The AMD Radeon RX 6600 has a board power of about 132W, but it can spike well above that for milliseconds at a time. Add a typical gaming CPU and the rest of the system, then keep the supply in its efficient 50-80% load band, and 450W is the comfortable target. The AMD Radeon RX 6600 draws power through a 8-pin PCIe connector, so any quality unit with the right PCIe cables works; an ATX 3.x unit is still a nice-to-have for transient headroom.

Three power supplies that fit the AMD Radeon RX 6600

Load figures assume this card at its 132W peak alongside a Ryzen 5 or Core i5 class CPU and 75W for the rest of the system, so roughly 302W at the wall-facing side of the supply. The card draws through an 8-pin PCIe connector.

Balanced

Best fit

Corsair CX550 (2023) 550W 80+ Bronze

550W · 80+ Bronze

PCIe 8-pin2
Depth140 mm
Warranty5 yr
Load at peak55%

Non-modular but compact at 140 mm, with one dual 6+2 PCIe cable. The honest floor for a single mid-range card on a tight budget.

Check the CX550 on Amazon

Room to upgrade

Corsair CX650 (2023) 650W 80+ Bronze

650W · 80+ Bronze

PCIe 8-pin2
Depth140 mm
Warranty5 yr
Load at peak46%

The small step up from the CX550 for a build that will take a hotter CPU. Same 140 mm body, same non-modular caveat.

Check the CX650 on Amazon

Anything under 60% keeps a hybrid-mode fan off for most of a gaming session, which is why the CX550 is the pick here rather than the cheapest unit that technically fits. Specifications are taken from each manufacturer's product page; confirm the exact revision before ordering, as connector counts change between refreshes of the same model name. As an Amazon Associate, SpecsCalc earns from qualifying purchases.

PCIe power connector types used with AMD Radeon RX 6600
The AMD Radeon RX 6600 takes an 8-pin PCIe connector. Use the native cable for that connector; an adapter stack is the most common cause of a melted plug.

Sources & verification

The 450W baseline is the manufacturer-class figure for the AMD Radeon RX 6600; the 450W target adds room for CPU choice and transient load. How both numbers are derived is set out in the methodology.

Frequently asked questions

What power supply do I need for the AMD Radeon RX 6600?

A 450W 80+ Gold unit is the recommended choice; it covers the card’s peak draw plus a transient-safe buffer and keeps the PSU in its efficient load band. 400W is the realistic minimum for a single-GPU build.

Is a 400W PSU enough for the AMD Radeon RX 6600?

It can run a modest build, since the card itself peaks around 132W, but it leaves little headroom for a power-hungry CPU or transient spikes. Stepping up to 450W is the safer, quieter long-term choice.

Does the AMD Radeon RX 6600 need an ATX 3.0 power supply?

No — it uses standard 8-pin PCIe power, so any quality PSU with the correct PCIe cables is fine. An ATX 3.x unit simply adds extra transient headroom.

Different parts? Run the full PSU Wattage Calculator, or browse every GPU’s PSU requirement.